Bottom Side; Remote Control - Mitsubishi Electric XD211U User Manual

Overview (continued)

Bottom side

Remote control

1
2
3
4
5
6
7
1
Rib faces top.
Hook faces bottom.
Cap RC lock button
Downloaded From projector-manual.com Mitsubishi Manuals
2
1
12
11
10
9
8
2
1 Adjustment feet
2 Lamp cover
1 ON button
2 KEYSTONE/VOLUME UP, DOWN buttons
3 MENU button
4 Direction buttons
5 ENTER button
6 COMPUTER button
7 VIDEO button
8 FREEZE button
9 AV (Audio/Video) MUTE button
10 ASPECT button
11 AUTO POSITION button
12 STANDBY button
• The UP and DOWN buttons are used in the KEY-
STONE adjustment in addition to the volume control.
Important:
• This projector is equipped with two remote controls.
One is installed on the top of the set; the other is
come with the package.
• To release it from the set, press the remote control
lock button, and the remote control will eject automat-
ically. See step 1 of the illustration.
• To fix the remote control to the set, place the remote
control into the remote control slot. See step 2 of the
illustration.
• Be sure to remove the transparent insulation tape by
pulling it before use. For further details, please refer
to the section "Remote control".
• If you don't want to remove the remote control from
the set, or prevent it from dropping accidentally, you
can use Cap RC lock button that came with the pack-
age to lock the remote control lock button.
• Be sure to follow the illustration to use Cap RC lock
button to prevent dropping.
EN-7