JVC KD-ADV5580 Instructions Manual page 38

About sounds reproduced through the
rear terminals
• Through the analog terminals (Speaker
out/LINE OUT):
2-channel signal is emitted. When playing a
multi-channel encoded disc, multi-channel signals
are downmixed. (AUDIO-DOWN MIX: see page
34.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, MPEG
Audio) are emitted through this terminal. (For
more details, see table below.)
To reproduce multi-channel sounds such as Dolby
Digital and MPEG Audio, connect an amplifier or
adecoder compatible with these multi-channel
sources to this terminal, and set "DIGITAL AUDIO
OUTPUT" correctly. (See page 34.)
On-screen guide icons
During playback, the following gUide icons may
appear for awhile on the monitor.
o
Playback
m
Pause
ClJIIIII
DVD-VideoIVCD: Forward slow
motion
~
DVD-Video: Reverse slow motion
~
Forward search
ctIII
Reverse search
DVD: The following icons appear at the beginning of
ascene containing:
li)
Multi-subtitle languages
6
Multi-audio languages
m
Multi-angle views
Output signals through the DIGITAL OUT terminal
Output signals are different depending on the "DIGITAL AUDIO OUTPUT" setting on the setup menu (see page
34).
OVO-Video 48 kHz, 16/20/24 bits
Linear PCM
96 kHz, Linear PCM
48 kHz, 16 bits stereo Linear PCM
*
48 kHz, 16 bits stereo Linear PCM
Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bits
stereo Linear PCM
MPEG Audio
Audio CO, Video CD
MPEG bitstream 48 kHz, 16 bits stereo Linear PCM
44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
OFF
MPEG 44.1/48 kHz, 16 bits Linear PCM
MP3/WMA 32/44.1/48 kHz, 16 bits Linear PCM
WAY 44.1 kHz, 16 bits stereo Linear PCM
*
Digital signals may be emitted at20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal ifthe
discs are not copy-protected.
38