JVC KD-ADV5580 Instructions Manual page 18

Hide thumbs Also See for KD-ADV5580:
Table of Contents

Advertisement

• For MPEG Video/MP3/WMAIWAV, track is searched
within the same folder.
• For DVD-VR, program/playlist search is possible
during Original program playback (PG)/Playlist
playback (PL).
• To erase amisentry, press CLR (clear) while holding
SHIFT.
• To return to the previous screen, press RETURN.
Using menu driven features... (DVD-Video/
DVD-VR)
IJJ
Press TOP MENU/DVD MENU to enter the menu
screen.
I1J
Press f:::,./v / <J/r> to select an item you want to
start play.
QJ
Press ENT (enter) to confirm.
Canceling the PBC playback... (VCDl
IJJ
During stop, press DIRECT while holding SHIFT.
I1J
Hold SHIFT, then press the number buttons (0 -
9)
to enter the desired number.
QJ
Press ENT (enter) to confirm.
• To resume PBC, press TOP MENU/DVD MENU.
18
• Operations using the
on-screen bar
(DVD/DVD-VRIMPEG Video!VCD)
These operations are possible on the monitor using the
remote controller.
1
Show the on-screen bar (see page 19).
(twice)
2
Select an item.
1I~
3
Make aselection.
If pop-up menu appears...
• To cancel pop-up menu, press RETURN.
• For entering time/numbers, see the follOWing.
Entering time/numbers
Press f:::,./v to change the number, then press <J/r> to
move to the next entry.
• Each time you press f:::,./v, the number increases/
decreases by one value.
• After entering the numbers, press ENT (enter).
• It is not reqUired to enter the zero and tailing zeros
(the last two digits in the example below).
Ex.: Time search
DVD: _:__:__ (Ex.: 1:02:00)
Press f:::,. once, then r> twice to go to the third entry, f:::,.
twice, then press ENT (enter).
Removing the on-screen bar

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kd-dv5500

Table of Contents