PARTS AND FEATURES 1. Sander attachment 2. Sanding base 3. Sanding base tip 4. Sanding sheet Additional accessories are available at extra cost from your local Black & Decker dealer.
(Original instructions) ENGLISH Intended use Your Black & Decker multi-purpose tool has been designed for a wide range of DIY applications. Using the sander head, this tool is intended for sanding wood, metal, plastics and painted surfaces. This tool is intended for consumer use only. Safety instructions General power tool safety warnings To reduce the risk of injury, the user must read the instruction manual.
ENGLISH (Original instructions) SAvE THESE INSTRUCTIONS Safety Warnings and Instructions • AlWAyS WEAR EyE AND RESPIRATORy PROTECTION. • Clean your tool out periodically. OTHER IMPORTANT SAFETy WARNINGS AND INSTRUCTIONS lEAD BASED PAINT Sanding of lead based paint is NOT RECOMMENDED due to the difficulty of controlling the contaminated dust.
(Original instructions) ENGLISH NOTE: This attachment only operates in the forward direction, the forward/reverse slider of the Power Unit should not be able to be switched to reverse. NOTE: Do not rest fingers on platen during use. Move it in long sweeping strokes across the surface, letting it do the work.
ENGLISH (Original instructions) Technical data when operate with 18V MATRIX unit Sander BDCMTS-XE 0-9000 (OPM) No-load speed Weight Level of sound pressure according to EN 60745: Sound pressure (L ) 76.4 dB(A), uncertainty (K) 3 dB(A) Sound power (L ) 87.4 dB(A), uncertainty (K) 3 dB(A)
Page 8
Australia & New Zealand Stanley Black & Decker 82 Taryn Drive, Epping, VIC 3076 Australia Tel.1800 444 224 (Aust) or Tel. 0800 339 258 (NZ) 90589527 REV-0 07/2012...