Basic Operation; 3D Sound; Audio Mode; Mute - Memorex MVD2030 Operating Instructions Manual

When " " appears while pressing a button, this means that the corresponding
function cannot be performed either on the disc inserted, or in the selected

3D SOUND

3D audio post-processing will give a multichannel effect
when using only 2 speakers. This only works with discs
encoded with Dolby Pro Logic, Dolby Digital and DTS multi-
channel audio tracks.
1
Press the 3D button repeatedly to achieve the highest
quality sound. The following surround effects will appear on
the TV screen when you press the 3D button repeatedly:
V SURR ON (VIRTUAL SURROUND ON)
REVERB ON
REVERB +V SURR (VIRTUAL SURROUND)
SURROUND OFF
DO NOT USE this feature if connecting to more than two
speakers.
Turn off the TV surround sound and other surround sound
effects when using this surround effect.

MUTE

Press the MUTE button once to mute the sound, "MUTE" will appear on the TV screen. Press the MUTE button again to
restore the sound; "MUTE OFF" will appear on the TV screen.

DISPLAY

Each press of the DISPLAY button will display the elapsed time and remaining time of a playing disc. Each press of the
DISPLAY button will cycle through, depending on the playback mode as follows:
1st press
2nd press
3rd press
4th press
5th press
BASIC OPERATION (GENERAL)
IMPORTANT:
mode.
DVD
Title Elapsed Time
Title Remaining Time
Chapter Elapsed Time
Chapter Remaining Time
Off
AUDIO MODE (AUDIO CD/VCD ONLY)
While playing an audio CD (not DVD), you can cycle
between the audio modes as follows:
1
Press the AUDIO MODE button to cycle through the audio
modes. The audio modes vary depending on the disc
inserted, but include MONO LEFT, MONO RIGHT, MIX-
MONO, STEREO, etc.
" " will appear if the disc does not support audio mode
changing.
CD/VCD
Track Elapsed Time
Track Remaining Time
Total Elapsed Time
Total Remaining Time
Off
20
MP3
Track Elapsed Time
Track Remaining Time
Off