Table of Contents
Advertisement
SG860C-12mHD
interference like hot wind, smoke, near
window etc. Furthermore, the sensitivity
of the PIR is strongly related to the
temperature. Higher temperature leads
to lower sensitivity. Therefore it is
suggested to set a higher sensitivity for
high temperature environment.
This parameter indicates how long the
PIR (Passive Infrared motion sensor) will
be disabled after each triggering in ON
mode. During this time the PIR of the
device will not react to the motion of
PIR
human (or animals). The minimum
Interval
interval is 0 second, it means the PIR
works all the time. The maximum
interval is 1 hour. It means the PIR will
be disabled for 1 hour after each
triggering. Press LEFT or RIGHT to
decrease or increase the value.
It means camera position. You can set
Camera
A-Z position for your camera, so that you
Posit
can distinguish which photo is taken by
which camera.
Choose language you need. It supports
Langua
four languages: English, Finnish, German
ge
and Swedish.
All images and videos in the SD card will
Format
be deleted, so make sure that you have
SD
made a backup of important data.
This parameter shows the information
Version
about software version and camera
3 Item Settings
Page 12
Advertisement
Table of Contents
