Table of Contents
Advertisement
SG860C-12mHD
2 Quick Start Guide
changing the timer triggering interval to a non-zero
value, the camera starts to work at a preset interval.
User need to OFF the PIR triggering (choose PIR
sensitivity as PIR OFF) if want the camera to work
only via Timer triggering.
2.4.3 PIR&Timer Triggering
For both PIR triggering and Timer triggering, the
user need go to PIR sensitivity to set "normal, high
or low" sensitivities according to the external
environments, and set the Timer interval to a
desired non-zero value. The camera will capture
pictures or videos in a preset time interval even
there is no motions detected, the camera will also
capture pictures and videos if motions get detected.
2.5 Enter into On Mode
After switching the camera to ON position, the
motion indication LED (red) will blink for about 10s.
This time interval is for you to make the camera
ready for automatic surveillance operation, e.g., to
close the camera and to lock it, to fix the camera on
a tree and to walk away. After entering into the ON
mode, no manual controls are needed and possible.
The
camera
will
take
pictures
or
videos
automatically
according
to
the
previous
programmed settings when human or animals enter
into the monitoring region.
Page 9
Advertisement
Table of Contents
