Table of Contents
Advertisement
SG860C-12mHD
3 Item Settings
adjusted only when the device in the
video mode under ON mode. Its value
extends from 5 to 60 seconds with a step
of one second. The default value is 10
seconds. Press LEFT and RIGHT to
decrease or increase the value by 1
second.
Time lapse means the camera can
capture photos or videos at a preset time
interval regardless of whether motions
are detected. The default parameter is
Off, which means this function is
Time
disabled. Changing this parameter to a
Lapse
non-zero value turns on the Time Lapse
mode, and camera will take photos at
given time interval.
Please note that if the PIR Trigger is set
to Off, then the Time Lapse can't be set to
.
Off
Choose sensitivity of the PIR sensor.
This parameter defines the sensitivity of
the PIR. There are four sensitivity
parameters: High, Normal, Low and Off.
The default value is "Normal". The higher
PIR
degree indicates that the Camera is more
Trigger
easily to be triggered by motion, taking
more pictures or recording more videos.
It is recommended to use high sensitivity
degree in room or environment with little
interference, and to use lower sensitivity
for outdoor or environment with lots of
Page 11
Advertisement
Table of Contents
