Changing The Tyres - LML Speedy 4-Stroke Owner's Manual

2.

CHANGING THE TYRES :

2.1 Removing and refixing the spare
wheel
2.1.1 Remove the left hand side cowl as
mentioned above.
2.1.2 Remove the protection cover of the
wheel by unscrewing the bolt with
the box spanner from your tool kit.
(Fig. 38).
2.1.3 The wheel is secured with two nuts.
Unscrew the nuts, remove the two
spring washers and take out the wheel.
2.1.4 For fixing the spare wheel follow the
above procedure in reverse order.
2.3.3 In case of auto start model, remove the
battery. Follow the instructions given on
page 37 for removal and installation of
battery.
2.3.4 Bring the fuel knob to "close" position.
Start the engine to exhaust petrol in the
carburettor as well as in the fuel line.
The engine will stop automatically
when the fuel is exhausted.
2.3.5 Remove the spare wheel as explained
on page 33.
Fig. 38
Precaution :
1.
2.
Care and Maintenance
2.2 Changing of Front Wheel
2.2.1 Put the vehicle on its central stand.
2.2.2 Hold the wheel cover at its edges and
pull it out gently from its clamps.
2.2.3 Remove the five nuts securing the
wheel to the brake drum by using
the box spanner from your tool kit
(Fig. 39). While loosening the nuts, hold
the wheel with one hand.
2.2.4 Remove the spring washers and take
out the wheel from the brake drum.
2.2.5 For refitting, follow the above
procedure in reverse order.
2.3 Changing of Rear Wheel :
2.3.1 Put the vehicle on its central stand.
2.3.2 Remove side cowls as explained on
page 32.
Care and Maintenance
2.3.6 Lay the scooter gently on ground on its
right hand side with the handle bar
sleeve touching the ground at right
angle.
2.3.7 Hold the wheel cover at its edges and
pull it out gently from its clamps.
2.3.8 Bring the vehicle in first gear and hold
the wheel with one hand. Remove the
five nuts securing the wheel to the
brake drum by using the box spanner
(Fig. 40).
2.3.9 Remove the spring washers and take
out the wheel from the brake drum.
2.3.10 For refitting, follow the above
procedure in reverse order.
Tighten all wheel securing nuts alternately and
progressively. Re-check if all nuts are tightened
properly.
Get the tyre pressure checked to the
recommended level at the nearest service station.
3 3
3 4