LML Speedy 4-Stroke Owner's Manual page 16

Table of Contents

Advertisement

2.
STARTING THE ENGINE (Fig. 33).
2.1 Turn fuel cock lever to "ON" position.
2.2 Turn 'ON' the ignition switch.
2.3 Put gear control in neutral position.
2.4 Pull out the choke knob for cold engine
start only.
2.5 Bring the throttle to idling position.
2.6 If you are starting the engine for the first
time in the day, press the clutch lever
and, keeping it pressed, kick the starter
lever a couple of times.
2.7 Operate the kick pedal by pushing it
down with a kick for starting the engine.
For auto start models, in addition to the
kick start, they have push button start
switch. For starting the engine with auto
start, press clutch lever and then press
the push button start switch.
2.8 When the engine is running normally,
press the choke knob back to
normal position.
3.4 Put the vehicle in motion by gradually
releasing the clutch and simultaneously
by rotating the accelerator throttle twist
grip towards yourself.
3.5 For changing gears, release the
accelerator throttle, press the clutch
lever and rotate the gear twist grip to
higher or lower gear as required.
3.6 Use indicator switch button for turning
and use horn whenever required.
3.7 For night driving use headlights.
Caution:
i.
Do not use electric starter for more than 5
seconds at a time. Release the push button
start switch for approximately ten seconds
before pressing it again. If the engine fails
to start after repeated attempts hold the
throttle 1/8-1/4 open and push the button start
switch.
ii.
Before using the auto start switch,
ensure that you press the clutch lever.
3.
DRIVING THE SCOOTER:
3.1 Remove the vehicle from stand, by
pushing it forward.
3.2 Seat yourself on the scooter with feet on
the ground and hands on the handle
bar.
3.3 With the engine running at idling speed,
press the clutch lever with the left hand
its
and rotate the gear twist grip to 1st gear
position.
4.
APPLICATION OF BRAKES:
4.1 Bring the accelerator throttle to its normal
position.
4.2 Press the clutch lever and change the
gear to the neutral position.
4.3 Use foot pedal brake and hand brake
simultaneously for the most efficient
braking.
Operating the vehicle
2 9
Operating the vehicle
3 0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents