Video Recording; Main Menu Sub-Menu - Ematic EVH625BL Product Manual

Video Menu Options
Main Menu
Video format
Recording int
Metering
White balance
Special effect
Date stamp

7. Video recording:

Push the Mode switch to Video Mode. Open the menu, press the Down key, and then select "REC interval". Then
press the shutter-release button to enter the sub-menu with the 1-minute, 3-minute, and 5-minute recording loop mode
options. Select a recording loop option and press the OK key for confirmation. Press the OK key again to exit from
the menu. Press the shutter-release button to start video recording. During video recording, the ActionCam will
automatically stop recording video based on your 1-minute, 3-minute, or 5-minute selection and will immediately
start a new video recording with the same time limit. This process will continue until you press the shutter-release
button to stop recording or when the memory card is full.
WARNING! When the memory card is full, the earliest recorded files will be deleted to create space for new
video recordings. This process will continually repeat when loop recording is on.
Sub-Menu
1280x720 High-resolution format.
640X480 Medium-resolution format.
Off Power off recording
1min Set record for 1 minute as a repeating phase.
3min Set record for 3 minutes as a repeating phase.
5min Set record for 5 minutes as a repeating phase.
Central
Metering subject to the central area.
metering
Multi-point
Metering subject to multi-points.
metering
Point metering Metering subject to one point.
Automatic Using automatic white balance, suitable for most environments.
Daylight Suitable for daylight environment.
Cloudy Suitable for cloudy environment.
Fluorescent
Suitable for fluorescent light source environment.
light
Tungsten light Suitable for tungsten light source environment.
Normal Normal effect.
White and
White and black effect.
black
Sepia Sepia effect.
Negative film Negative film effect.
Red Reddish effect.
Green Greenish effect.
Blue Bluish effect.
Off Turn off display date/time on the file.
During capture/record mode, display date on right bottom corner
Date
of the file.
During capture/record mode, display date and time on right
Date and time
bottom corner of the file.
7
Description