Application In Pc - Ematic EVH625BL Product Manual

Setting the Date and Time:
Press the OK key to open the menu, and press the power button to enter the setup menu. Press the Down key to select
"Date & Time". Then press the shutter-release button to enter the setup menu for Date and Time.
In the Date and Time menu, press the power button to select the item you want to set (date, time, year, etc.). The
selected item will be highlighted in yellow. Then press the Up or Down key to adjust the date and time. Once the date
and time is set, press the shutter-release button to confirm your changes. Press the OK key to exit the date and time
setup and return to the previous screen. Press the OK key again to exit the setup mode.

Application in PC

Application in PC
1. Connect to a PC
The ActionCam is equipped with a plug and play function. Connect the ActionCam to the computer with a USB
cable.
A portable hard disk icon will be shown in "My Computer" on your PC. Captured images and are stored in the
portable hard disk folder I:\DCIM\100MEDIA ("I" indicates equipment portable hard disk)
Under the environment with electrostatic discharge, the product may be hanged and the PC-link could not be
maintained. If the portable hard disk icon can't be found in the "My Computer" section of your PC, you may have
to disconnect the ActionCam and reconnect again.
2. Use Computer ActionCam Function
After connecting the ActionCam to the computer, press the OK key to enter ActionCam mode.
13