Table of Contents
Advertisement
Installing the optional fan
Install the optional fan only if you are using a passive cooler or a water cooler.
Installing the optional fan with an active CPU cooler will interfere with the airflow
and destabilize the system.
1.
Position the fan above the pipe
and heatsink assembly.
•
•
Do not tilt the fan.
2-
3.
Carefully push down the fan until
it snugly fits the heatsink, then
connect the fan cables.
Plug the optional fan cables to the NB_FAN and/or PWR_FAN connector
on the motherboard.
Make sure the optional fan is installed correctly to prevent damage to the
fan and motherboard components.
2.
Fit the grooved edge to the
heatsink.
Do not install the fan with its rear side
facing you.
Chapter 2: Hardware information
Hide quick links:
Advertisement
Table of Contents
