Alfa Romeo 4C Spider 2015 User Manual page 75

Phone Pairing
How To Connect To A Bluetooth® Compatible Device (Pairing)
For details on the control from a Bluetooth® compatible device, refer to the Owner's Manual of the
Bluetooth® compatible device.
Pairing a Bluetooth® compatible device with SSP (Secure Simple Pairing)
1. Using your Bluetooth® compatible device, select the "Alpine CD Receiver" for pairing.
2. Turn the Rotary encoder to change the head unit display from "Pairing NO" to "Pairing YES, " and
then press /ENTER.
If "Pairing NO" is selected, the connection will be canceled.
3. If the pairing was successful, "Connected" is displayed for a few seconds. The head unit then
returns to its previous state.
Pairing a Bluetooth® compatible device without SSP (Secure Simple Pairing)
1. Using your Bluetooth® compatible device, select the "Alpine CD Receiver" for pairing.
2. Input the passcode ("0000") in a Bluetooth® compatible device.
NOTE:
The passcode is fixed as "0000. "
3. If the pairing was successful, "Connected" is displayed for a few seconds. The head unit then
returns to its previous state.
NOTE:
• If the connection is unsuccessful, "Failed" is displayed.
• After a successful pairing, the two devices should reconnect automatically whenever the
vehicle's ignition is turned ON. If the auto connection fails, try to reconnect manually.
• Set "Visible Mode" to ON to enable this unit to be recognized by a Bluetooth® compatible device.
• You can also manually pair the Bluetooth® devices from this unit.
• Refer to the Radio Supplement on the USB Card for further details.
Bluetooth® Setup
The following steps 1 through 5 are common to the various Bluetooth® functions. For details, refer
to each individual function.
NOTE:
Set "Bluetooth IN" to ON, and then perform Bluetooth® SETUP operation. Refer to the Radio
Supplement on the USB Card for further details.
1. Press and hold AUDIO/SETUP for at least 2 seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select "Bluetooth", and then press
The Bluetooth® setup mode is activated.
E L E C T R O N I C S
/ENTER.
73