Keyboard And Mouse Connector (Cn11) - Aaeon PCM-6890 User Manual

Keyboard
(CN11)
The mainboard provides a keyboard connector which supports
both a keyboard and a PS/2 style mouse. In most cases, especially
in embedded applications, a keyboard is not used. The standard
PC/AT BIOS will report an error or fail during power-on-self-test
(POST) after a reset if the keyboard is not present. The main-
board BIOS Advanced setup menu allows you to select "Present"
or "Absent" under the "System Keyboard" section. This allows
no-keyboard operation in embedded system applications without
the system halting under POST (power-on-self-test).
Keyboard and mouse connector
Pin
1
2
3
4
5
6
7
8
and mouse
Signal
KB DATA
GND
MS DATA
N/C
KB CLOCK
Vcc
MS CLOCK
N/C
connector
(CN11)
Chapter 2 Installation 31