Internal Connectors; Internal Connectors Page; Floppy Disk Drive Connector (34-1 Pin Floppy); Power Led Connector (3-1 Pin Pled) - Asus P5SD2-FM Hardware User Manual

1.7.2

Internal connectors

1.

Floppy disk drive connector (34-1 pin FLOPPY)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.
P5SD2-FM Floppy Disk Drive Connector
2.

Power LED connector (3-1 pin PLED)

This 3-1 pin connector is for the system power LED. Connect the 3-pin power
LED cable from the system chassis to this connector. The LED lights up when
you turn on the system power, and blinks when the system is in sleep mode.
P5SD2-FM PLED Connector
1-26
r
r
1
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN 1
PLED
Chapter 1: Hardware information