Friendly Robotics Robomow RL 1000 Operating & Safety Manual page 44

4.2 Setting the Weekly Program
Remove the Manual Controller and follow the steps as outlined below.
Pressing the 'C' button at any time will change the display back to the main screen.
Important! For best cutting performance, it is recommended to set the weekly program, so the Robomow
and the sprinkler never run simultaneously.
44
Manual
User Options
User Preferences
Press GO
Docking options
Press GO
Weekly program
Press GO
Set program
Press GO
M T W T F S S
Press GO
Depart 00:00
Next digit
Depart Depart 12:30 12:30
Next digit Next digit
Mode Edge + Mow Mode Edge + Mow
Confirm Confirm
M T W T F S S M T W T F S S
Press GO Press GO
Figure 4.2 – Setting the Weekly Program
Press 'GO'
Scroll up or down until the
'Docking options' is displayed
Press 'GO'
Press 'GO'
Press 'GO'
Scroll to the day you want
to set and Press 'GO'
Scroll to set the time and Press 'GO'
for the next digit ('C' is used to go back)
Press 'GO' to confirm Press 'GO' to confirm
Scroll to the operation mode Scroll to the operation mode
and press 'GO' to confirm and press 'GO' to confirm
('Edge + Mow' or 'Mow' only – ('Edge + Mow' or 'Mow' only –
'None' use to cancel active day) 'None' use to cancel active day)
Scroll to the next day you Scroll to the next day you
want to set and Press 'GO' want to set and Press 'GO'