The detector should be switched type (always on or always off). If the detector has
detected the smoke or people or animal to enter the area, the detector will switch on
or switch off. And it will send the external alarm signal into the KAICONG™ SIP1018.
Input
pins
6) Power Input Socket: Connect DC adaptor, its output should be 5V power
specification.
7) RESET Button: reset button is on the bottom of the device, Press the RESET button
and hold on more than 10 seconds, the equipment will restart and recover to the
factory default settings.
4
Network Connecting
4.1 Connection Instruction
Before visit the KAICONG™ SIP1018, you should firstly connect it to the Network, supply
the power to it, and check if the light of RJ45 Socket is normal to make sure all of the
communication links are fluent. The connection method is like as Figure 5.
1) KAICONG™ SIP1018-1 and KAICONG™ SIP1018-2 are connected separately to 2
Anything else ,please contanct me.
PIR Power
Figure 4
Figure 5
Kaicong-Nothing important than safety!
PIR
Switch