KaiCong SIP1018 User Manual page 10

as "Local PC information". Only the last section of the IP address which needs
setting by yourself, you can set it as 139 just like Figure 6.
 If you don't know how to fill out the content of "IP config", you could also tick
the "Set IP automatically" to get the IP address from the router automatically.
 Put the user name and password into "Authentication"
is: admin, password is:
Select the device in list box, click "Browse" button, it will open the Browser
automatically and pop up a window at the same time which requires to inputting the
user name and password. Then you see the home page of the KAICONG™
SIP1018-1, click "English" on the right-top corner, just as below Figure 7. On the
right corner of the interface, user can choose the language.
Search IP Camera
Download Software
http://kaicong.net/download/KaiCongIPCameraFinder.zip
Operate Software
Choose "English" and Click "Advance Mode" , search IP Camera
Anything else ,please contanct me.
123456). Click "Update". The setting will take effect now.
Kaicong-Nothing important than safety!
(By default, the user name