Add More Products; Specific Option - Bang & Olufsen BeoRemote One User Manual

Add more products

From the factory BeoRemote One is
set up for use with a television
(BeoVision) only.
If you want to use BeoRemote One
with a new type of Bang & Olufsen
product or if you want to use the
same BeoRemote One to operate
more than one product, the product
must be shown in the
BeoRemote One LIST for you to
select it.
The products you operate with
BeoRemote One are divided into
three types:
– Televisions
(default BeoVision):
8 different product Options
– Music systems
(default BeoSound):
8 different product Options
– 'Beo4' products* (default
1
Beo4 VIDEO, Beo4 AUDIO etc.):
4 different product Options
The Option settings allow your
BeoRemote One to operate your products
individually. If, for example, you have two
televisions in the same room and commands
from your BeoRemote One can be received
by both, you must set up each of the
televisions as an individual product, and set
it to the correct Option.
The settings you make for your
BeoRemote One are saved for the active
product. To find out how to switch to
another product, see page 15.
Note! If a Network Link product is intended
for operation with Beo4, you must set it up as
a 'Beo4' product instead. For more
information, see pages 16–18.
Step 1 – Add or remove a product in the LIST
In order for BeoRemote One to operate a
new product, you must first add the
product to the BeoRemote One LIST for
you to select it.
Then you must set up the product to a
specific Option in the Product Option menu
for BeoRemote One to recognise it as an
individual product, see page 14.
To add or remove a product found via the
LIST button ...
Press to bring up Settings in
the BeoRemote One display
Press to bring up Advanced
Press to select Products
Press to select Show
Press to select the product to
show or hide, such as
BeoVision(2)
Press to switch between show
or hide (no selection)
Continue with the next
product to show or hide. Or ...
... press to back up through
previous menus, or press and
hold to exit the menu
completely
13
BeoVision
Mute
Stand
LIST
When you have added a product to the LIST,
you always find the active product in the top
Settings
when you press LIST.
* For information about how to use and
1
operate a 'Beo4' product with
Advanced
BeoRemote One,
Note that you can rename a product or
Products
change the order in which it appears when
you bring it up via the LIST button. This is
done in the same way as sources or functions
are renamed or moved for the TV, MUSIC and
Show
LIST buttons, see page 10
...
...
BACK
Active product
see pages 16–18.
and page 11.