Table of Contents
Advertisement
2. System Memory (DIMM)
Only Dual Inline Memory Modules (DIMM's) can be used with this motherboard.
Two sockets are available for 3.3Volt (power level) Unbuffered Synchronous DRAM
(SDRAM) or ED0 DRAM of either 8,16,32,64, or 128MB to form a memory size
between 8MB to 256MB. One side (with memory chips) of the DIMM module
takes up one Row on the motherboard.
IMPORTANT: Memory speed setup is required through "Auto Configura-
tion" in BIOS Chipset Setup of the BIOS SOFTWARE.
Install memory in any combination as follows:
DIMM
Socket 1
SDRAM SMB, 16MB, 32MB
SDRAM 64MB, 128MB
(Rows O&l)
Socket 2
SDRAM SMB, 16MB, 32MB
(Rows 2&3)
SDRAM 64MB, 128MB
Socket 3
(Rows 4&5)
NOTE:
Maximum memory size is 256MB total for this motherboard.
l
Socket 3 will not support 64MB or 128MB DIMMs with 64Mbit SDRAM cells.
l
If Socket 1 and/or Socket 2 has 64MB or 128MB DIMM's with 64Mbit SDRAM
l
cells, Socket 3 must be empty.
16%pin DIMM Memory Modules
but
(Socket 3 must be empty)
but
(Socket 3 must be empty)
Socket 1 or 2 must not have
64MB or 128MB SDRAM
xl
xl
but
xl
I =
S
Total Memory
21
Advertisement
Table of Contents
