To Program The Memory (Up To 24 Tracks) - Memorex MD3026 Operating Instructions Manual

MD3026.O/M.QXD 3/21/02

TO PROGRAM THE MEMORY (UP TO 24 TRACKS)

1
3
With a CD inserted, press the
Play/Pause (
to turn the unit on and press the
( )/Power Off
button
playback. Press the PROGRAM button
; the PROG indicator will blink in the
CD display.
3
1
Press the Play/Pause (
button to begin Program playback
and adjust the VOLUME control
BASS switch as desired.
NOTES:
• Press the Stop ( )/Power Off
• As each program is played, the track number is shown in the display.
• To clear the memorized program: press the Stop ( )/Power Off button again
while in the stop mode, wait approximately 60 seconds and the unit will turn off or
open the CD compartment.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
4:01 PM Page 9
CD OPERATION (CONTINUED)
1
Select the first track to be played back
)/Power On
button
using the
Stop
button
to stop auto
button
program additional tracks up to a
maximum of 24 tracks.
2
3
To skip forward or backward through
)/Power On
the programs, press the
and
through playing, it will stop.
to stop the disc before it is finished.
button
9
2
1
2
Skip/Search
, then press the PROGRAM
again. Repeat this step to
4
1
2
. When the disc is
or button
or
Skip/Search