Radio (Tuner) - Alfa Romeo MiTo 2008 Sound System Use And Maintenance Manual

INTRODUCTION
When the radio is turned on the last func-
tion selected prior to switching off will come
on: Radio, CD, CD MP3 or Media Player (on-
ly with Blue&Me™ or Blue&Me™ Nav).
To select the Radio function whilst listening
to another audio source, press the FM
or AM buttons briefly, depending on the
band desired.
Once the Radio mode is activated, the dis-
play will show the name (RDS stations on-
ly) and the frequency of the radio station se-
lected, the frequency band selected (e.g.
FM1) and the preselection button number
(e.g. P1).
(
RADIO TUNER
FREQUENCY BAND
SELECTION
With the Radio mode activated, press the FM
or AM button briefly and repeatedly to se-
AS
lect the desired reception band.
Each time the button is pressed the follow-
ing bands are selected cyclically:
AS
❍ Pressing the FM
button: "FM1",
AS
"FM2" or "FMA";
❍ Pressing the AM button: , "MW" and
"LW".
Each band is highlighted by the name in the
display. The last station selected on the re-
spective frequency band will be tuned into.
The FM band is divided into the following
sections: FM1, FM2 or "FMA"; the FMA
reception band is reserved for broadcasters
memorized automatically using the Auto-
STore function
)
PRESELECTION BUTTONS
The buttons numbered from 1 to 6 are used
to set the following presets:
❍ 18 on the FM band FM (6 on FM1, 6
on FM2, 6 on FMT or "FMA" (on some
versions);
❍ 6 on the MW band;
❍ 6 on the LW band;
To listen to a preset station, select the desired
frequency band and then briefly press the cor-
responding preset button (from 1 to 6).
By pressing the preset button for more than
2 seconds, the tuned station will be stored.
The storing will be confirmed by an acoustic
signal.
27
5