Telephone Preparation - Alfa Romeo MiTo 2008 Sound System Use And Maintenance Manual

TELEPHONE PREPARATION

If a hands-free kit is installed on the car,
when there is an incoming phonecall the ra-
dio audio will be connected to the telephone
output. The incoming telephone sound is al-
ways at a fixed volume, but it can be adjust-
ed during the conversation using the
ON/OFF button/knob.
The fixed telephone audio volume can be
adjusted using the "EXT Audio" function in
the Menu. The word PHONE will appear on
the display during the deactivation of the au-
dio for the phonecall.
FUNCTIONS AND ADJUSTMENTS
ANTI-THEFT PROTECTION
The radio is equipped with an anti-theft pro-
tection system based on the exchange of in-
formation between the radio and the elec-
tronic control unit (Body Computer) on the
car.
This system guarantees maximum security
and avoids the secret code having to be en-
tered every time after the radio power sup-
ply is disconnected.
If the outcome of the check is positive, the
radio will start to work, whilst if the codes
compared are not the same or if the elec-
tronic control unit (Body Computer) is re-
placed, the equipment will notify the user of
the need to enter the password following the
procedure in the paragraph below.
Entering the password
When the radio is switched on, if the pass-
word is requested, the display will show "Ra-
dio code" for about 2 seconds followed by
four dashes "- - - -".
The password is made up of four numbers
from 1 to 6, each corresponding to one of
the dashes.
To enter the first number, press the button
corresponding to the preset stations (from
1 to 6). Enter the other code numbers in the
same way.
If the four digits are not entered within 20
seconds, the display will show "Enter code
- - - -". If this occurs, it is not considered an
incorrect code entry.
25
4