Screw Identification - Dell Latitude V700 Service Manual

Before You Begin : Dell Latitude V700 Service Manual
Flash BIOS update program floppy disk or CD (required only when upgrading the
microprocessor or replacing the system board)

Screw Identification

Before removing and replacing components, photocopy the screw placemat as a tool
to help keep track of the screws. The placemat provides the number of screws and the
sizes.
NOTICE: When reinstalling a screw, you must use a screw of the correct
diameter and length. Make sure that the screw is properly aligned with its
corresponding hole, and avoid over tightening.
Screw Placemat
file:///F|/Service%20Manuals/Dell/Latitude/v700/begin.htm (3 of 5) [2/28/2004 8:20:06 AM]