Table of Contents
Advertisement
Display : Dell Latitude V700 Service Manual
NOTICE:
When reconnecting the display flex cable, press down on both ends of
the connector, not in the middle. Pressing the middle of the connector can
damage fragile components.
3. Remove the
4. Remove the M2.5 x 6-mm screw securing the display flex-cable mounting
bracket to the top cover assembly.
5. Remove the four M2 x 3-mm screws (two on each side) from the right and left
sides of the panel.
6. Lift the display panel and flex cable out of the top cover assembly.
7. Disconnect the display flex cable from the two connectors (a ZIF and a standard
connector) on the display panel.
NOTE:
If you find a kaption tape on the standard connector, remove it.
file:///F|/Service%20Manuals/Dell/Latitude/v700/display.htm (8 of 12) [2/28/2004 8:20:09 AM]
display
bezel.
Advertisement
Table of Contents
