Hobot -168 User Manual

Glass cleaning robot
Hide thumbs Also See for HOBOT-168:

Advertisement

Quick Links

HOBOT
HOBOT-168 Glass Cleaning Robot
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HOBOT-168 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hobot HOBOT-168

  • Page 1 HOBOT HOBOT-168 Glass Cleaning Robot User’s Manual...
  • Page 2: Technical Support

    Copyright Copyright © 2012 by HOBOT® Technology Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
  • Page 3: Important Safety Precautions

    14. Keep hair, loose clothing, fingers, and all parts of body away from the openings and moving parts. 15. Do not use in areas with existed flammable or combustible liquids, gas. - 2 - HOBOT...
  • Page 4: Product Introduction

    Product introduction HOBOT-168 is a glass-cleaning robot, with a vacuum motor inside that can suck air and stand on the glass surface. An embedded UPS (Un-interrupted Power System) can prevent the robot falling from the window even when no electrical power.
  • Page 5: Getting To Know The Device

    Safety rope Lower hooking hole HOBOT-168 shall always connect power cable for normal using. Make sure the battery was full-charged (green lamp ON) before using. (1) First, turn off the power-switch on the device. Plug in the power. Orange lamp ON means charging.
  • Page 6 (1) Do not use it on frameless glass. (2) Make sure put cleaning ring onto cleaning wheel correctly for no leakage. (3) Do not use it in rainy or moist day. (4) Set danger-warning area downstairs for no-balcony window and door. - 5 - HOBOT...
  • Page 7: Remote Controller

    Auto Left then Down Auto Right then Down ※ Please remove the insulation spacer in the bottom of back of remote controller before using. If you have to replace the battery, just pull down the battery cover. - 6 - HOBOT...
  • Page 8 Plug into DC power jack DC extension cable Using the cleaning ring and the cleaning cloth 1. Cover cleaning ring with cleaning cloth. 2. Put cleaning ring onto cleaning wheel correctly (luck 6 claws) for no leakage. - 7 - HOBOT...
  • Page 9: Frequently Asked Questions (Faq)

    Q7: What to do if HOBOT stopped at higher area while no electric power supplied, HOBOT alarm and red lamp is flashing? Ans: (1) User can pull HOBOT back with safety rope. Slightly pull the safety rope at - 8 -...
  • Page 10 Q8: What to do if HOBOT abnormally stopped and red lamp is flashing, without alarm? Ans:(1) User can move HOBOT to safe area by remote control, or pull HOBOT back with safety rope. Slightly pull the safety rope at an angle close to the glass to prevent dropping.
  • Page 11: General Safety Information

    Product storage temperature: -10℃~50℃(14℉~122℉)。 Limited warranty If there are defects in your HOBOT glass-cleaning robot due to faulty materials, workmanship or function within warranty period from the date of purchase or delivery, please contact the local retailers or local authorized dealers for repair or replacement.
  • Page 12 Hobot Technology Inc. www.hobot.com.tw - 11 - HOBOT...

Table of Contents