Using This Product's Ipod Function From Your Ipod; Selecting A Song In The Album (Link Search); Iphone Or Smartphone Applications; Using Appradiomode - Pioneer AVH-X5750BT Owner's Manual

iPod
2 Touch or to switch the music or video
category list.
3 Touch the category you want to search for.
If you use English as the system language, the alphabet search
function is available. Touch the initial search bar to use this
function.
4 Touch the title of the list that you want to play.
If you can not find the desired song or video, try to search again
according to the above steps.
5 Start playback of the selected list.
p Depending on the generation or version of the iPod, some
functions may not be available.
p You can play playlists created with the MusicSphere applica-
tion. The application is available on our website.
Using this product's iPod func-
tion from your iPod
You can control this product's iPod function from the iPod on
"App Mode". The application screen of the iPod can be dis-
played on this product, and the music files and video files are
played back with this product.
p While this function is in use, the iPod will not turn off even if
the ignition key is turned off. Operate the iPod to turn off the
power.
1 Touch .
2 Operate the connected iPod to select a video or
song and play.
p Some functions are still accessible from this product even if
the control mode is set to "App Mode". However, the opera-
tion will depend on your applications.
p Touch to switch the control mode.
Selecting a song in the album
(link search)
1 Touch the artwork to open the list of songs.
2 Touch the song to play back.
28

iPhone or smartphone applications

Displays the launcher
application screen.
Displays the previous screen.
AppRadio Mode/MirrorLink
Abcdefg Abcdefg Abcdefg Abcdefg
Displays the current source.
Displays the menu screen.
p In AppRadioMode and MirrorLink Mode, App control side
bar will appear.
p Press the DISP button to hide the App control side bar. Press
the DISP button again to display it again.
and are not available depending on the type of
p
device.
WARNING
Certain uses of an iPhone or a smartphone may not be
legal while driving in your jurisdiction, so you must be
aware of and obey any such restrictions.
If in doubt as to a particular function, only perform it
while the car is parked.
No feature should be used unless it is safe to do so
under the driving conditions you are experiencing.

Using AppRadioMode

You can control applications for an iPhone or a smartphone
directly from the screen (AppRadioMode).
In AppRadioMode, you can operate applications with finger
gestures such as tapping, dragging, scrolling or flicking on the
screen of this product.
p In this chapter, iPhone and iPod touch will be referred to as
"iPhone".
p The compatible finger gestures vary depending on the
application for an iPhone or a smartphone.
p Even though an application is not compatible with
AppRadioMode, depending on the application an image
may be displayed. But you can not operate the application.
To use AppRadioMode, install the AppRadio app on the iPhone
or smartphone in advance. For details about the AppRadio app,
visit the following site:
http://www.pioneerelectronics.com/AppRadioMode
p Be sure to read Using app-based connected content before
you perform this operation.
 Using app-based connected content on page 60
Abcdefg
●
Pioneer is not liable for any issues that may arise from
incorrect or flawed app-based content.
●
The content and functionality of the supported
applications are the responsibility of the App providers.
21 48
6/10
●
In AppRadioMode, functionality through the product is
limited while driving, with available functions determined
by the App providers.
●
Availability of AppRadioMode functionality is determined
by the App provider, and not determined by Pioneer.
●
AppRadioMode allows access to applications other than
those listed (subject to limitations while driving), but the
extent to which content can be used is determined by the
App providers.
Starting procedure
When connecting an iPhone or smartphone to this product, you
must select the method for connecting your device. Settings are
required according to the connected device.
 Setup for iPod / iPhone or smartphone on page 15
For iPhone users
1 Connect your iPhone.
 iPhone with Lightning connector on page 49
2 Press .
3 Touch [APPS].
When the application is ready to launch, messages appear on
the screen of this product and your iPhone.
4 Use your iPhone to launch the application.
The AppRadio app is launched.
5 Touch [OK].