Epson PowerLite Home Cinema 640 User Manual page 52

Hide thumbs Also See for PowerLite Home Cinema 640:
Table of Contents

Advertisement

4. Insert the Quick Wireless Connection USB key into the same port used for the wireless LAN module.
You see a projected message that the network information update is complete.
5. Remove the USB key.
6. Reinsert the wireless LAN module into the projector.
7. Connect the USB key to a USB port on your computer or laptop.
Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchQWRD.exe, then
select Allow on the next screen.
8. Follow the on-screen instructions to install the Quick Wireless Connection driver.
Note: If you see a Windows Firewall message, click Yes to disable the firewall for this application.
After a few minutes, your computer image is displayed by the projector. If it does not appear, press
the LAN button on your remote control or restart your computer.
9. Run your presentation as necessary.
10. When you finish projecting wirelessly, select the Safely Remove Hardware option in the Windows
taskbar, then remove the USB key from your computer.
Note: You may need to restart your computer to reactivate your wireless LAN connection.
Parent topic:
Wireless Network Projection
52

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerlite home cinema 740hdPowerlite home cinema 1040Powerlite 640Powerlite 1040Powerlite 740hd

Table of Contents