Inserting The Battery; Charging The Battery - HTC Sensation 4G User Manual

14 Getting started

Inserting the battery

Please use only original batteries that came in the box or replacements that we
recommend.
1. Take the back cover off.
2. Insert the battery (with its exposed copper contacts first) into the battery
compartment.

Charging the battery

The battery is partially charged when shipped. Before you turn on and start using HTC
Sensation 4G, it is recommended that you charge the battery. Some batteries perform
best after several full charge/discharge cycles.
§ The battery is already installed in HTC Sensation 4G when shipped. A thin film is
inserted between the battery and the compartment. You need to remove this film
before you can charge the battery.
§ Only the power adapter and USB sync cable provided in the box must be used to
charge the battery.
§ Do not remove the battery from HTC Sensation 4G while you are charging it using
the power or car adapter.
1. Plug the power adapter into the USB connector.
2. Plug in the power adapter to an electrical outlet to start charging the battery.
As the battery is being charged, the notification LED shows a solid orange light. The
light turns to solid green when the battery is fully charged.