Osd Message - Dell ST2010 Service Manual

Service Manual
Menu Transparency
Menu Timer
Menu Lock Unlock
Lock
DDC/CI Enable
Disable
LCD Conditioning Disable
Enable
Factory Reset
Personalize Shortcutkey1 Preset Modes
Brightness
/Contrast
Auto Adjust
Input Source
Shortcutkey2 Preset Modes
Brightness
/Contrast
Auto Adjust
Input Source
In OSD dialog box, should show current input video signal (1Auto select, 2 VGA,
3 HDMI ), current model resolution @ Ver. Freq., optimum resolution.

5.3 OSD Message

After disconnecting the cable, Self Test message should show as below:
Press any OSD key and should show the input source (1. Auto Detect, 2 VGA,3
HDMI )dialog box on the right bottom of panel
After disabling the sync output for VGA (HDMI), DPMS message should show as
below for 3s:
"MESSAGE
Entering Power save Mode"
Press any OSD key and the DPMS message should show as below:
"MESSAGE
There is no sigal coming from you computer
Press any key on the keyboard or mouse to wake it or press the
Input button on your display to switch to another source
20 Yes Yes
20 Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes Yes
34