Table of Contents
Advertisement
Note: The MyKey system status menu
display may include the remote start system
as an additional key in the total count of
programmed keys. See Checking MyKey
System Status (page 58).
MYKEY TROUBLESHOOTING
Condition
I cannot create a MyKey.
Navigator (TB5) Canada/United States of America, enUSA, First Printing
MyKey
With a non-Ford-approved aftermarket
remote start system, it is possible to program
all key vehicle key fobs as MyKeys
unintentionally. If this happens, then the
remote start system transmitter is the admin
key. If you want to have only one vehicle key
fob as a MyKey, or do not want to have any
MyKeys, then you need to use your remote
start system transmitter to clear all MyKeys.
In that case, follow these steps:
1. Enter your vehicle and close all doors.
The transmitter used to start the vehicle is not an admin key.
The transmitter used to start the vehicle is the only admin key. There always has to be at least one
admin key.
The transmitter is not in its backup position. See Starting a Gasoline Engine (page 157).
The passive anti-theft system is disabled or in unlimited mode.
I n f o r ma t i o n P r o v i d e d b y :
60
2. Start your vehicle using your
non-Ford-approved remote start system
transmitter.
3. See Clearing All MyKeys (page 56).
Follow Steps 1-3.
After clearing your MyKeys, you can create
a new MyKey. See Creating a MyKey (page
55).
Note: With push-button start, you cannot
program the remote start system transmitter
as a MyKey. Always treat the remote start
system transmitter as you would any other
admin key.
Potential Causes
Advertisement
Table of Contents
