Table of Contents
Advertisement
WARNINGS
The head restraint is a safety device.
Whenever possible it should be
installed and properly adjusted when the
seat is occupied. Failure to adjust the head
restraint properly could reduce its
effectiveness during certain impacts.
Install the head restraint properly to
help minimize the risk of neck injury in
the event of a crash.
Note: Adjust the seatback to an upright
driving position before adjusting the head
restraint. Adjust the head restraint so that
the top of it is level with the top of your head
and as far forward as possible. Make sure
that you remain comfortable. If you are
extremely tall, adjust the head restraint to
its highest position.
Navigator (TB5) Canada/United States of America, enUSA, First Printing
Seats
E138642
The head restraints consist of:
A
An energy absorbing head
restraint.
B
Two steel stems.
C
Guide sleeve adjust and release
button.
D
Guide sleeve unlock and remove
button.
Adjusting the Head Restraint
Raising the Head Restraint
Pull the head restraint up.
I n f o r ma t i o n P r o v i d e d b y :
133
Lowering the Head Restraint
1. Press and hold button C.
2. Push the head restraint down.
Removing the Head Restraint
1. Pull the head restraint up until it reaches
its highest position.
2. Press and hold buttons C and D.
3. Pull the head restraint up.
Installing the Head Restraint
Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.
Second Row Outboard Head Restraints
The outboard head restraints are
non-adjustable, but you can fold them.
Advertisement
Table of Contents
