Table of Contents
Advertisement
LevelOne
Please follow the steps beolw to setup a profile:
1. Check Enable this profile.
2. Select the applied mode: Day mode, Night mode, or schedule mode. Please manually enter a range of
time if you choose Schedule mode.
3. Configure Exposure Settings in the second column. Please refer to page 56 for detailed information.
4. Configure EIS Settings in the third column. Please refer to the last page for detailed information.
5. Click Save to enable the setting and click Close to exit the page.
Advanced Mode
Video quality settings for stream 1 / stream 2
The Network Camera offers two choices of video compression standards for real-time viewing: MPEG-4
and MJPEG.
Click the items to display the detailed configuration settings. You can set up two seperate streams for the
Network Camera for different viewing devices. For example, set a smaller frame size and lower bit rate
for remote viewing on mobile phones and a larger video size and a higher bit rate for live viewing on web
browsers.
If
MPEG-4
mode is selected, the video is streamed via RTSP protocol.
There are four parameters provided in MPEG-4 mode which allow you to adjust the video performance:
58 - User Manual
Advertisement
Table of Contents
