Appendix - Sharp LC-40LE360X Operation Manual

USB Media Player
®
DivX setup
This is the function to confi rm your registration code.
1
Press MENU and the MENU screen displays.
2
Press c / d to select "
" (Option).
3
Press a /b to select "DivX ( R ) VOD", and then press ENTER.
• Copy the 10 digit code down.
DivX ( R ) VOD Register
You need to visit the DivX main page to register your TV. Please follow the online instruction to create DivX
account and DivX registration video download.
Your registration is complete when you play the DivX registration video on TV.
DivX ( R ) VOD Deregister
You can fi nd the deregistration code (8~10 digits). Please use this code to deactivate on DivX website.
NOTE
• Visit http://vod.divx.com for more information about DivX
List of fi les compatible with USB mode
USB device/File system USB Memory/FAT/FAT32/NTFS
Photo file format JPEG (.jpg)/PNG/BMP
Music file format (Files may not be MP3 (.mp3) Bitrate: 32 k, 40 k, 48 k, 56 k, 64 k, 80 k, 96 k, 112 k, 128 k, 160 k,
playable depending on the bitrate) 192 k, 224 k, 256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k, 48 kHz
File extension
*.avi
*.mkv
*.mp4
*.mov
*.vob
*.mpg/*.mpeg
*.ts/*.trp/*.tp
*.asf
*.divx
® VOD.
Video fi le format
Container Video
DivX 3.11/4.12/5.x/6
H.264
AVI
MPEG4
Motion Jpeg
DivX 3.11/4.12/5.x/6
MKV H.264
MPEG4
DivX 3.11/4.12/5.x/6
MP4 H.264
MPEG4
MPEG2 – PS MPEG2
MPG MPEG2
MPEG MPEG1
H.264
TS
MPEG2
DivX 3.11/4.12/5.x/6
ASF
VC-1
DivX DivX 3.11/4/4.12/5.x/6

Appendix

Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the
TV serviced.
Problem
• No power. • Check if you pressed POWER on the remote control unit. (See page 5.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected?
• Has the power been turned on? (See page 5.)
• Unit cannot be operated. • External infl uences such as lightning, static electricity, etc., may cause improper operation.
In this case, operate the unit after fi rst turning the power off the TV or unplugging the AC
cord and re-plugging it in after 1 or 2 minutes.
• Is battery inserted with polarity (e, f) aligned? (See page 4.)
• Remote control unit does
not operate.
• Is battery worn out? (Replace with new battery.)
• Are you using it under strong or fl uorescent lighting?
• Is a fl uorescent light shining on the remote control sensor?
• Picture is cut off. • Is the image position correct? (See page 10)
• Are screen mode adjustments such as picture size made correctly?
(See pages 7 and 10.)
• Strange colour, light • Adjust the picture tone. (See page 7.)
colour, or dark, or colour
• Is the room too bright? The picture may look dark in a room that is too bright.
misalignment.
• Check the colour system setting. (See pages 6, 9.)
• Check the input signal setting. (See page 10.)
• Check the HDMI auto view setting. (See page 8.)
• Power is suddenly turned • The unit's internal temperature has increased.
off.
Remove any objects blocking the vent or clean.
• Check the ECO setting. (See page 7.)
• Is the sleep timer set? (See page 4.)
• No picture. • Is the connection to external equipment correct? (See page 3.)
• Has the input signal setup been performed correctly after connection? (See page 10.)
• Is the correct input selected?
• Is the "Picture adjust" correct? (See page 7.)
• Is the antenna connected properly? (See page 3.)
• Is "On" selected in "Audio only"? (See page 9.)
• No sound. • Is the volume too low? (See page 4.)
• Make sure that headphones are not connected.
• The TV sometimes makes a • This is not a malfunction. This happens when the cabinet slightly expands and contracts
cracking sound. according to changes in temperature. This does not affect the TV's performance.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
Possible Solution
- 15