Before You Proceed - Asus P4SDR-VM User Manual

2.3

Before you proceed

Take note of the following precautions before you install motherboard
components or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any
component.
2. Use a grounded wrist strap or touch a safely grounded object or to
a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity.
3. Hold components by the edges to avoid touching the ICs on them.
4. Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
5. Before you install or remove any component, ensure that the
ATX power supply is switched off or the power cord is
detached from the power supply. Failure to do so may cause
severe damage to the motherboard, peripherals, and/or
components.
When lit, the standby power LED (SBPWRLED1) indicates that the
system is ON, in sleep mode, or in soft-off mode, a reminder that you
should shut down the system before removing or plugging in any
motherboard component.
P4SDR-VM Standby Power LED
ASUS P4SDR-VM motherboard user guide
P4SDR-VM
®
SBPWRLED1
ON
OFF
Standby Powered
Power Off
2-3