Fitting A Different Plug; Initial Use - Beko DFN16210W User Manual

Installation

Fitting a different plug

As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals on your plug, proceed as follows:
1. Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked 'E' or with the symbol
coloured green and yellow or green.
2. Connect the blue (neutral) wire to
the terminal in the plug marked 'N' or
coloured black.
3. Connect the brown (live) wire to the
terminal in the plug marked 'L' or
coloured red.
Green and yellow
or green
N
Blue or
black
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a
qualified electrician.
Dishwasher / User's Manual

Initial use

Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in
sections "Important safety instructions"
and "Installation".
•
or
A
L
Brown or red
Before using the product, fill the salt
reservoir with 1 litre of water, add salt
(see next page) and stir to dissolve.
Run the Dishwasher without dishes
on a short programme with a small
amount of detergent.
There might be a small amount
of water left in the product
after factory quality control
tests. This causes no harm to
the product.
11 / 38 EN