Table of Contents
Advertisement
1. JP6 ( Clear CMOS jumper)
You may clear the CMOS data to its default values by this jumper.
Default value doesn't include the "Shunter" to prevent from improper use this jumper.
To clear CMOS, temporarily short 2-3 pin.
1
1-2 Close: Normal operation (Default setting)
1
2-3 Close: Clear CMOS
2. JP_REC1 (BIOS recovery jumper)
Open: Normal operation (Default setting)
Close: Enable BIOS Recovery function.
3. PASS_DIS1 (Skip password jumper)
Open: Normal operation. (Default setting)
Close: Clear Supervisor Password in BIOS setup menu.
2 4
Jumper Setting
Advertisement
Table of Contents
