GE AFH12 Use And Care Manual page 4

operating
Your AirContiitioner controls
I
SELECTOR
selector s titch
OFF turns air conditioner off.
HIGH FN permits high fan
speed operation without cooling or
heating.
LOW FM permits low fan
speed operation without cooling or
heating.
HIGH COOL permits cooling with
high fan speed operation.
LOW COOL permits cooling with
low fan speed operation.
HIGH HEAT permits heating with
high fan speed operation.
LOW HEAT permits heating with
low fan speed operation.
Temperature control
When you turn TE~ERATU~
control to desired setting, thermo-
stat will automatically control the
temperature of the indoor air. The
higher the number selected, the
cooler the indoor air will be; the
lower the number, the warmer the
indoor air.
AIR
OUT
exhaust
When this control is set at "closedj'
only the air inside the room can be
circulated and conditioned. When
it's in the
"open"
position, some
indoor air can be exhausted from
the room.
Fornormal cooling
Formaxinlulm cooling
1. Set SELECTOR switch at HIGH
1. Set SELECTOR switch at HIGH
COOL..
COOL.
2. Set TEMPERATURE control at 2. Set TEMPERATURE control
desired number (usually the rnid- at 10.
point is a good starting position). If
room temperature is not satisfactory
3. Set AIR OUT control at "closed"
after a reasonable time, set the tem-
position.
perature control at a higher number
for a cooler room or at a lower num-
ber for a warmer room.
3. Set AIR OUT control at "closed"
posifion.