Microsd Card Slot; Digital Paper Device Security - Sony DPT-S1 User Manual

microSD Card Slot

The microSD card slot is located on the back of the
device. Hold the microSD card with the contacts
facing down and the arrow pointing toward the
microSD card slot, and then insert it until it clicks into
place. The access indicator lights up in orange while
the device is accessing the microSD card.
Close the slot cover when using a microSD card.
To format a microSD card, see page 59.
Note
 Do not remove the microSD card while the access
indicator is lit.
To remove a microSD card, push it in once, then
slide it out slowly with your finger.
 microSD access indicator
 Slot cover

Digital Paper Device Security

You can lock the Digital Paper device or enable
internal memory encryption for security.
Note
 Sony recommends that you make a note of your
passwords.
 Sony recommends that you use passwords that
have a mix of 6 or more letters and numbers.
 Do not create passwords that other people could
easily guess. Change your passwords periodically.
Locking the Digital Paper Device
You can help prevent others from viewing data in the
device by locking it.
1
Press the (Home) button and tap [Settings].
2
Tap [System Management]  [Device Lock] 
[Device Lock]  [Enable]  [OK].
3
Enter your device lock password.
You can enter between 1 and 20 alphanumeric
characters and symbols as your device lock
password.
4
Enter the password again to confirm and tap
[OK].
When the device lock is on, the password entry
screen is displayed after the device is turned on or
when the Digital Paper device is woken from sleep
mode.
Enter your password and tap [OK] to release the
device lock.
Note
 If you forget your password, contact the Sony
Support Center to unlock your device. Please note
that this may result in loss of your content.
13