Table of Contents
Advertisement
Case A
Connecting to a Wi-Fi router with a WPS button
(page 44)
Case B
Connecting to a Wi-Fi router with WPS PIN input
(page 44)
Case C
Connecting to a Wi-Fi router by selecting a network
name (page 45)
Case D
Connecting to a public Wi-Fi network (page 45)
Other than case A to D (Manual setup)
Set up a Wi-Fi network connection manually when
connecting to an access point for which the SSID is
hidden (page 46).
Case A: Connecting to a Wi-Fi router with a
WPS button
The Digital Paper device is compatible with WPS (Wi-
Fi Protected Setup), which lets you easily make a Wi-
Fi connection using the "WPS" button on your WPS-
compatible Wi-Fi router.
1
Turn on [Wi-Fi] on the device (page 43).
2
Tap [Wi-Fi Settings].
3
Tap [WPS Push-Button Configuration] [Start].
4
On your Wi-Fi router, press the "WPS"* button
within 2 minutes.
The device automatically attempts to establish a
Wi-Fi connection.
* The name of the button on your Wi-Fi router may
vary.
"WPS" button
5
After the setup completion screen appears, tap
[OK].
You can check the Wi-Fi connection status by the
Wi-Fi icon on the status bar (page 17).
For details on Wi-Fi settings, see page 48.
Case B: Connecting to a Wi-Fi router with
WPS PIN input
If your WPS-compatible Wi-Fi router does not support
push-button configuration, connect by using a PIN
(Personal Identification Number).
1
Turn on [Wi-Fi] on the device (page 43).
2
Tap [Wi-Fi Settings].
3
Tap [Add Wi-Fi Network] [WPS PIN Method]
[Start].
A PIN code will be shown on the screen of the
device.
4
Enter the PIN code into your Wi-Fi router.
Refer to your Wi-Fi router's instruction manual for
details.
5
Tap [OK] on the screen of the device.
44
Advertisement
Table of Contents
