Power Levels; Automatic Roasting - GE JE1455L Use And Care & Cooking Manual

Automatic Roasting

Auto Roast uses the temperature
probe to cook to the desired
serving temperature. Unlike
a single power level, Auto Roast
uses up to 3 power settings which
automatically switch during
roasting, thus providing even,
tender cooking results without
overcooking.
Just as in regular roasting,
only tender roasts should be
Auto Roasted until specified
internal temperatures are reached.
Less tender roasts should be
microwaved by time, according
to the Cooking Guide.
Preparing Roasti for
Auto Roasting
Place tender beef roast in cooking
dish. (Refer to package instructions
for proper use of cooking bag.)
Insert probe through cooking bag
horizontally into the center meaty
area not touching bone or fat.
Make sure the handle does not
touch the food or top or sides of
the oven.
I
Place pork roast in cooking bag
and place in microwave-safe dish.
12
Place meat in oven with probe to
the right. Insert cable end of probe
firmly into receptacle on oven wall.
How to Auto Roast Beef
Roast to Medium
AUTO ROAST
1. Touch AUTO ROAST Dad.
Touch number pad 1. " 1"and the
selected doneness code—in this
case, "MEd"- appear on the
display. "CODE" flashes. After 4
seconds, "START" flashes on the
display. Touch START. (See "Auto
Roast-Guide" for complete list of
recommended codes. )
FOOD TEMP
Note: By touching the AUTO
ROAST pad during cooking, the
meat's internal temperature will be
displayed. ("COOL" will be
displayed until meat reaches 90°F.)
When pad is released, doneness
code reappears on the display.
I
2. When you select Auto Roast
codes 1 or 2, the oven signals with
beeps and "'TURn" fl~shes on
4
the display when it's time to turn
the roast over. After You turn the
roast, close the door ~nd touch
START. (Note: Oven continues to
cook after the signal whether or
not roast is turned over.)
3. After a pre-programmed food
temperature is reached, oven beeps
4 times and "HOLd" appears on
the display.
4. Food will be held at this
temperature for 60 minutes. The
CODE
oven then beeps 4 times and
"End" appears.
I
CODE
CODE