Sony Alpha ILCE-6000 Help Manual page 379

Help Guide
How to Use
Interchangeable Lens Digital Camera
ILCE-6000
Charging the battery pack
The supplied AC Adaptor is dedicated to this product. Do not connect with other electronic devices. Doing so may
cause a malfunction.
Make sure to use a genuine Sony AC Adaptor.
If the product's Charge lamp flashes while charging, remove the battery pack being charged, and then insert the same
battery pack firmly back into the product. If the Charge lamp flashes again, this may indicate a faulty battery or that a
battery pack other than the specified type has been inserted. Check that the battery pack is the specified type.
If the battery pack is the specified type, remove the battery pack, replace it with a new or different one and check that
the newly inserted battery is charging correctly. If the newly inserted battery is charging correctly, the previously
inserted battery may be faulty.
If the Charge lamp flashes even if the AC Adaptor is connected to the product and the wall outlet (wall socket), this
indicates that charging has stopped temporarily and is on standby. Charging stops and enters standby status
automatically when the temperature is outside of the recommended operating temperature. When the temperature
returns to the appropriate range, charging resumes and the Charge lamp lights up again. We recommend charging the
battery pack in an ambient temperature of between 10°C to 30°C (50°F to 86°F).
Even if the supplied AC Adaptor is used with the product when you shoot or play back images, power is not supplied
from the wall outlet (wall socket). If you use the AC-PW20 AC Adaptor (sold separately), you will be able to shoot or
play back images while power is supplied from the wall outlet (wall socket).
Notes on use
4-534-933-11(1)
Copyright 2014 Sony Corporation
374