D-Link DFE-550TX User Manual page 12

Adapter provides the following features:
•
Plug and Play installation.
•
Complies with the IEEE 802.3 10Base-T and 802.3u 100Base-TX Ethernet
standards.
•
RJ-45 connector for standard network cable connection.
•
100Mbps Fast Ethernet or 10Mbps Ethernet data transfer rates, automatically
configured by NWay auto-negotiation.
•
Full duplex or half-duplex operation, also NWay configured.
•
PCI Bus Master direct memory access for high throughput and low CPU
utilization.
•
ACPI 1.0 power management compliant.
•
Wake-On-LAN power-saving feature allows sleeping PCs to be woken up and
used via remote stations.
•
IEEE 802.3x Flow Control enabled with full duplex operation, allowing
enhanced operation when directly connected to a switch.
•
IEEE 802.1Q/VLAN Tagging supported
•
VLAN registration using IEEE802.1Q GVRP standard
•
IEEE 802.1p Tagging supported
•
IP Multicast packet filtering reduces CPU utilization and conserves network
bandwidth.
•
Sixteen packet counters provide a full range of network management statistics.
•
DL10050B D-Link's own 32-bit intelligent Ethernet controller.
•
Large 2Kb Tx, 2Kb Rx FIFO buffers synchronize transmissions and buffer data
to help prevent packet loss.
•
Three LED indicators: Link/Act, Speed (10/100), Full/Half Duplex.
•
Drivers for all leading Network Operating Systems.
D-Link DFE-550TX Adapter
5