Voice Control - Sony Ericsson tm506 Manual

Bella_UG_TMO_P1C_AE.book Page 26 Friday, May 23, 2008 9:35 AM
To enter your voicemail number
1 From standby select
> Messaging
number.
2 Enter the number and select OK.
To call your voicemail service
• From standby press and hold
down

Voice control

By creating voice commands you can:
• Voice dial – call someone by saying
their name
• Answer and reject calls when you
use a handsfree
To record a voice command using
voice dialing
1 From standby select
> the General
> Voice dialing
2 Select
and select a contact. If the contact
has more than one number, select the
number to add the voice command to.
3 Record a voice command such as
"John mobile".
4 Follow the instructions that appear.
Wait for the tone and say the
command to record. The voice
command is played back to you.
26 Calling
P P reflighted by Preflighted by reflighted by
Menu
> Settings > Voicemail
.
Menu >
tab > Voice control
> Activate.
Yes > New voice command
( ( ( ) ) )
5 If the recording sounds OK, select
Yes. If not, select
3 and 4.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
Voice dialing
You can hear your recorded contact
name when you receive a call from
that contact.
To voice dial
1 From standby press and hold down
a volume key.
2 Wait for the tone and say a recorded
name, for example "John mobile".
The name is played back to you and
the call is connected.
Settings
Voice answering
When you use a handsfree, you can
answer or reject incoming calls with
your voice.
To activate voice answering and
record voice answer commands
1 From standby select
> the General
> Voice answer
2 Follow the instructions that appear
and select
say "Answer", or another word.
No and repeat steps
Menu > Settings
tab > Voice control
> Activate.
Cont. Wait for the tone and