Table of Contents
Advertisement
Quick guide
Charging
Set the mode dial to
1
[OFF].
Open the card/battery
2
door.
Lift the flap upright and turn it
counter-clockwise until it clicks for
unlocking and then open the door.
3
Insert the battery.
Inserting SD cards
(sold separately)
Place label upwards.
Slide straight in until hearing card catch.
Close the card/battery
4
door.
Close the door and turn the flap
clockwise to the locking position and
then push the flap back flat.
Connect the AC adaptor
5
(supplied).
To AC outlet
AC cable
10
VQT2A17
Lever
Press until hearing lever lock.
AC adaptor
Small gap here.
6
Open the terminal cover.
Lift the flap upright and turn it
counter-clockwise until it clicks for
unlocking and then open the cover.
Plug the DC plug into the
7
DC input terminal on the
unit.
Status indicator
Flashing red: Charging in
progress
Off: Charging complete
Setting the date and time
Set the mode dial to
1
a position other than
[OFF].
2
Select [YES].
Set the date and time.
3
To select settings
To change
numerical values
Enter the date and time.
4
•
This procedure is for setting the
date and time the very first time. For
the setting procedure for the second
and subsequent times (P.30).
VQT2A17
11
Advertisement
Table of Contents
