Asus E3746 Hardware User Manual page 172

5. When done, press <Enter> to confirm the creation of the RAID set. A
dialogue box appears to confirm the action. Press <Y> to confirm; otherwise,
press <N>.
JMicron Technology Corp. PCI-to-SATA II/IDE RAID Controller BIOS v0.97
[Create New RAID]
Name: JRAID
Level: 0-Stripe
Disks: Select Disk
Block: 128 KB
Size : 319 GB
Confirm Creation
[RAID Disk Drive List]
[
Pressing <Y> deletes all the data in the HDDs.
6. The following screen appears, displaying the relevant information about the
RAID set you created.
[RAID Disk Drive List]
RDD0: JRAID
5-46
Create RAID on the selected HDD (Y/N)? Y
TAB]-Switch Window
Model Name RAID Level
0-Stripe
[Hard Disk Drive List]
Model Name
HDD0: HDS722516VLSA80
HDD1: HDS722516DLA380
CONFIRM RAID CREATION
ALL DATA ON THE SELECTED HARD DISK
WILL BE LOST WHEN EXIT WITH SAVING
[ ]-Select Item [ENTER]-Action
Capacity
XXX GB
Available Type/Status
164 GB Non-RAID
164 GB Non-RAID
[ESC]-Exit
Status Members(HDDx)
Normal 01
Chapter 5: Software support