Important Information/Safety Instructions - Panasonic KX-TGA230CW Installation Manual

2.4 ghz optional cordless handset
Table of Contents

Advertisement

PQQX13468ZA-AK-E 02.8.8 2:11 PM ページ 6
Important Information/Safety
NOTICE:
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Privacy of communications may not be ensured when using this telephone.
Operating near 2.4 GHz electrical appliances may cause interference. Move
away from the electrical appliances.
Caution:
To prevent radio interference to licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
The cordless handset may be occasionally used outdoors as permitted by
government regulations.
The term "IC:" before the radio certification number only signifies that Industry
Canada technical specifications were met.
Take special care to follow the safety suggestions listed below.
Safety
1) The unit should be connected to a power supply only of the type described in
the operating instructions or as marked on the unit.
2) When left unused for a long period of time, the base unit should be unplugged
from the household AC outlet.
Installations
Environment
1) Do not use this unit near water—for example, near a bathtub, washbowl, sink,
etc. Damp basements should also be avoided.
2) The unit should be kept away from heat sources such as radiators, kitchen
range, etc. It also should not be placed in rooms where the temperature is
less than 5°C (41°F) or greater than 40°C (104°F).
3) The AC adaptor is used as the main power source. Ensure that the AC outlet
is located/installed near the unit and is easily accessible.
Placement
1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall onto, and liquids are not
spilled into, the unit. Do not subject this unit to excessive smoke, dust,
mechanical vibration or shock.
3) Place the unit on a flat surface.
Instructions!
– 6 –

Advertisement

Table of Contents
loading

Table of Contents