Do you have a question about the DSX9 and is the answer not in the manual?
Questions and answers
George Johnston
May 19, 2025
transmitter screen shows -
SW Warning
AUX2 SW
FM2
How do I fix this
1 comments:
Mr. Anderson
May 23, 2025
To fix the "SW Warning AUX2 SW FM2" issue on a JR ProPo DSX9 transmitter, follow these steps:
1. Understand the Warning: This warning indicates that one or more switches (AUX2 or FM2) are not in their default (expected) positions when the transmitter is powered on.
2. Identify the Switches: - AUX2: This is typically assigned to a 2- or 3-position switch used for auxiliary functions. - FM2: This refers to Flight Mode switch position 2.
3. Power On Procedure: - Turn on the transmitter. - If the warning appears, look at the position of the AUX2 and FM2 switches. - Move each switch to its default or expected position (usually the top or middle position, depending on the model setup).
4. Restart: - Once the switches are in the correct positions, the warning should clear automatically. - If not, power off the transmitter, ensure the switches are in default positions, and power it on again.
5. Optional – Adjust Warning Settings: - If needed, you can disable or change switch warning settings in the system menu: - Go to System Settings. - Locate Switch Warning. - Adjust or disable warnings for specific switches if appropriate for your use.
This ensures safe startup and prevents unintended control inputs.
Need help?
Do you have a question about the DSX9 and is the answer not in the manual?
Questions and answers
transmitter screen shows - SW Warning AUX2 SW FM2 How do I fix this
To fix the "SW Warning AUX2 SW FM2" issue on a JR ProPo DSX9 transmitter, follow these steps:
1. Understand the Warning: This warning indicates that one or more switches (AUX2 or FM2) are not in their default (expected) positions when the transmitter is powered on.
2. Identify the Switches:
- AUX2: This is typically assigned to a 2- or 3-position switch used for auxiliary functions.
- FM2: This refers to Flight Mode switch position 2.
3. Power On Procedure:
- Turn on the transmitter.
- If the warning appears, look at the position of the AUX2 and FM2 switches.
- Move each switch to its default or expected position (usually the top or middle position, depending on the model setup).
4. Restart:
- Once the switches are in the correct positions, the warning should clear automatically.
- If not, power off the transmitter, ensure the switches are in default positions, and power it on again.
5. Optional – Adjust Warning Settings:
- If needed, you can disable or change switch warning settings in the system menu:
- Go to System Settings.
- Locate Switch Warning.
- Adjust or disable warnings for specific switches if appropriate for your use.
This ensures safe startup and prevents unintended control inputs.
This answer is automatically generated