Usb Configuration - Asus A8N-VM CSM User Manual

Palette Snooping [Disabled] Palette Snooping [Disabled]
Palette Snooping [Disabled] Palette Snooping [Disabled] Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Configuration options: [Disabled] [Enabled]
IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [PCI Device] [Reserved]
2.4.7 2.4.7 2.4.7

USB Configuration

USB Configuration USB Configuration
2.4.7 2.4.7 USB Configuration USB Configuration
Advanced
USB Configuration
Module Version - 2.24.0-11.4
USB Devices Enabled:
None
Legacy USB Support
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows
None.
Legacy USB Support [Auto] Legacy USB Support [Auto] Legacy USB Support [Auto]
Legacy USB Support [Auto] Legacy USB Support [Auto]
Allows you to enable or disable support for USB devices on legacy
operating systems (OS). Setting to Auto allows the system to detect the
presence of USB devices at startup. If detected, the USB controller legacy
mode is enabled. If no USB device is detected, the legacy USB support is
disabled. Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed]
USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [FullSpeed] [HiSpeed]
BIOS EHCI Hand-Off [Enabled] BIOS EHCI Hand-Off [Enabled] BIOS EHCI Hand-Off [Enabled]
BIOS EHCI Hand-Off [Enabled] BIOS EHCI Hand-Off [Enabled]
Allows you to enable support for operating systems without an EHCI
hand-off feature. Configuration options: [Disabled] [Enabled]
A S U S A 8 N - V M C S M A S U S A 8 N - V M C S M
A S U S A 8 N - V M C S M A S U S A 8 N - V M C S M A S U S A 8 N - V M C S M
BIOS SETUP UTILITY
[Auto]
[HiSpeed]
[Enabled]
Enables 1.1 USB host
controllers.
Select Screen
Select Item
+-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
2 - 2 7 2 - 2 7
2 - 2 7 2 - 2 7 2 - 2 7